be quiet! Power Zone 2
A quiet, efficient Platinum unit with very good transient response. A solid mid-range pick.
- Efficiency
- 80+ Platinum
- Modular
- Full
- Standard
- ATX 3
- Form factor
- ATX
- Outputs
- 750 / 850 / 1000W
The verdict
The Power Zone 2 sits in the middle of be quiet!'s range, with Platinum efficiency, a 140mm fan and semi-passive operation.
HWBusters found the 1000W model highly efficient and quiet, with very good transient response under both normal and ATX 3.1 loads. It found nothing out of order in the build quality.
The weak spots are 12V ripple at full load in hot conditions and loose regulation on the minor rails. It also lacks fan failure protection.
be quiet! Power Zone 2 reviews
One lab review so far. HWBusters found the 1000W model highly efficient and quiet, with very good transient response under normal and ATX 3.1 loads, but 12V ripple rose at full load in hot conditions.
What the lab found
- Cybenetics Platinum efficiency, silent operation, high build quality and good transient response on all rails under normal loads. HWBusters
- Increased 12V ripple at full load at 45°C, loose load regulation on the minor rails, high minor-rail over-current limits and no fan failure protection. HWBusters
- A 140mm rifle bearing fan, semi-passive operation and an angled 12V-2x6 connector. HWBusters
Only one lab review found so far. HWBusters tested the 1000W model. The 1200W Power Zone 2 EU Version is listed separately in Tier A.
Pick your output
- 750WMid-range builds, up to an RTX 5070 Ti class card.Check 750W price
- 850WHigh-end builds, up to an RTX 5080 class card.Check 850W price
- 1000WThe most power-hungry cards, RTX 5090 class.Check 1000W price
Sizes assume a typical processor. Check your build in the wattage guide.
Other Tier B at 850W
- be quiet! Pure Power 13 M80+ GoldCheck price
- MSI MAG A850GL PCIE580+ GoldCheck price
- ASRock Pro Gold80+ GoldCheck price
- ASUS Prime Gold80+ GoldCheck price
Specs
| Tier on my list | B · Mid-range builds |
|---|---|
| Wattages | 750W, 850W, 1000W |
| Efficiency | 80 Plus Platinum |
| Modular | Fully modular |
| Standard | ATX 3 |
| Size | ATX |
| Released | 2025 |
be quiet! Power Zone 2 questions
Is the be quiet! Power Zone 2 quiet?
Yes. HWBusters rated it silent, and the 1000W model has a Cybenetics A+ noise rating (15-20 dBA).
Where does the Power Zone 2 sit in be quiet!'s range?
HWBusters places it below the Straight Power 12 and Dark Power 13, and above the Pure Power 12.
What capacitors does it use?
HWBusters found Elite capacitors, which it considers among the best alternatives to the usual Japanese makers.
What warranty does the Power Zone 2 have?
Ten years, according to HWBusters.
Which be quiet! Power Zone 2 wattage should I get?
It comes in 750W, 850W, 1000W. Match it to your graphics card using the output guide above, or the calculator for your exact parts.
Can I reuse cables from my old power supply with the Power Zone 2?
Use the cables that came in the box. Modular cables aren't standard between brands, or even between generations from one brand, and the wrong cable can damage your parts.