XPG Core Reactor II VE
Good value from a proven CWT platform, but it runs hot and loud when pushed hard in a warm room.
- Efficiency
- 80+ Gold
- Modular
- Full
- Standard
- ATX 3
- Form factor
- ATX
- Outputs
- 650 / 750 / 850W
The verdict
The VE is the cheaper version of XPG's Core Reactor II: the same CWT platform, with fewer cables, less expensive capacitors and a 7-year warranty.
Both labs found decent performance for the money. HWBusters says the parts are good enough to easily outlive the warranty, and Tom's Hardware praised its efficiency and voltage regulation.
The weak spot is heat. Tom's Hardware found it loud and thermally stressed under heavy load in a hot environment, and both labs flag ripple suppression. For a typical gaming PC that's fine; for a PC under constant heavy load, look elsewhere.
XPG Core Reactor II VE reviews
Both labs found decent performance and good value from the same CWT platform as the pricier Core Reactor II. Both also flag weaker ripple suppression, and Tom's Hardware found it noisy and thermally stressed when hot and heavily loaded.
Both labs agree
- ATX 3.1 compliant and fully modular, with a 7-year warranty. HWBustersTom's Hardware
- Built by CWT with good-quality parts, at an affordable price. HWBustersTom's Hardware
- No semi-passive mode: the fan always runs, at very low speed when the load is light. HWBustersTom's Hardware
- Ripple suppression could be better. HWBustersTom's Hardware
Where they differ
- Noise: HWBusters found it quiet at loads up to 620W. Tom's Hardware found the noise rises significantly beyond about 60-65% load in hot conditions. HWBustersTom's Hardware
Also worth knowing
- Mediocre transient response at 12V and 3.3V, and load regulation could be tighter overall. HWBusters
- In hot conditions under heavy load, efficiency drops and internal temperatures run uncomfortably high, though they stayed below the over-temperature trigger. Tom's Hardware
Given the expected price tag, the performance is good, and the parts that CWT used are of high quality to easily outlive the seven-year warranty.Core Reactor II VE 850W, ATX 3.1Tom's HardwareOctober 2024
It's ideal for mainstream users but not when continuous stress in a hot environment is expected.Core Reactor II VE 850W, ATX 3.1
Both labs tested the 850W model. The VE has fewer cables and less expensive capacitors than the regular Core Reactor II, hence its shorter 7-year warranty.
Pick your output
- 650WMid-range builds, up to an RTX 5070 class card.Check 650W price
- 750WMid-range builds, up to an RTX 5070 Ti class card.Check 750W price
- 850WHigh-end builds, up to an RTX 5080 class card.Check 850W price
Sizes assume a typical processor. Check your build in the wattage guide.
Other Tier A at 850W
- 1st Player NGDP Gold80+ GoldCheck price
- be quiet! Dark Power 1380+ TitaniumCheck price
- be quiet! Dark Power 1480+ TitaniumCheck price
- Corsair RMx (2024)80+ GoldCheck price
Specs
| Tier on my list | A · High-end builds |
|---|---|
| Wattages | 650W, 750W, 850W |
| Efficiency | 80 Plus Gold |
| Modular | Fully modular |
| Standard | ATX 3 |
| Size | ATX |
| Released | 2024 |
XPG Core Reactor II VE questions
What's the difference between the Core Reactor II VE and the regular Core Reactor II?
HWBusters says the VE uses the same CWT platform with fewer cables, less expensive capacitors and a shorter warranty. It found the VE about 4% behind on overall performance, and it was expected to cost less.
Is the Core Reactor II VE quiet?
At everyday loads, yes. HWBusters found it quiet up to 620W. Tom's Hardware found the noise rises significantly beyond about 60-65% load in hot conditions.
Does it have a zero RPM fan mode?
No. Tom's Hardware found the fan runs all the time, at very low speed while the load is low.
What warranty does it have?
Seven years, according to both reviews.
Which XPG Core Reactor II VE wattage should I get?
It comes in 650W, 750W, 850W. Match it to your graphics card using the output guide above, or the calculator for your exact parts.
Can I reuse cables from my old power supply with the Core Reactor II VE?
Use the cables that came in the box. Modular cables aren't standard between brands, or even between generations from one brand, and the wrong cable can damage your parts.