Montech Century II
Strong value with a 10-year warranty in a compact size. Check the noise findings if you want a quiet PC.
- Efficiency
- 80+ Gold
- Modular
- Full
- Standard
- ATX 3
- Form factor
- ATX
- Outputs
- 850 / 1050 / 1200W
The verdict
The Century II packs a 135mm fan into a compact 140mm body, with ATX 3.1 support and a 10-year warranty, and both labs say it's good value.
HWBusters and Tom's Hardware both found strong electrical performance and good ripple suppression. HWBusters calls it highly competitive for the money.
Noise is the open question. HWBusters found the fan aggressive at moderate loads, while Tom's Hardware found it silent through typical use. HWBusters also wants the minor-rail protections tuned, which is why it held back its Recommended badge.
Montech Century II reviews
Both labs rate its electrical performance and value highly. They disagree on noise: HWBusters found the fan aggressive even at moderate loads, while Tom's Hardware found it silent through typical desktop use.
Both labs agree
- ATX 3.1 and PCIe 5.1 compliant, with a 10-year warranty. HWBustersTom's Hardware
- Strong electrical performance for the price, with good ripple suppression. HWBustersTom's Hardware
- A 135mm fluid dynamic bearing fan in a compact 140mm-deep unit. HWBustersTom's Hardware
Where they differ
- Noise: HWBusters found an aggressive fan profile that makes it noisy even at moderate loads. Tom's Hardware found the fan stays off until about 400W and stays fairly quiet through most of the range. HWBustersTom's Hardware
Also worth knowing
- Over-current protection on the minor rails needs adjusting, inrush currents are high and there's no fan failure protection. HWBusters held back its Recommended badge because of the protection settings. HWBusters
- Tom's Hardware lists limited 12V-2x6 connectors and a fan grille that may cause turbulence as drawbacks. Tom's Hardware
This unit is also not suitable for users seeking the quietest possible high-capacity PSU, as it employs an aggressive fan speed profile, resulting in increased noise even at moderate loads.Century II 1050W, ATX 3.1Tom's HardwareMay 2025
While not perfect, it justifies its modest price with quality components, balanced features, and a 10-year warranty—though some design choices limit its full potential.Century II Gold 1050W, ATX 3.1
Both labs tested the 1050W model. It's made by Shenzhen Xinweiye Technology, which Tom's Hardware lists as an unproven OEM.
Pick your output
- 850WHigh-end builds, up to an RTX 5080 class card.Check 850W price
- 1050WThe most power-hungry cards, RTX 5090 class.Check 1050W price
- 1200WFlagship builds with plenty of headroom.Check 1200W price
Sizes assume a typical processor. Check your build in the wattage guide.
Other Tier A at 850W
- 1st Player NGDP Gold80+ GoldCheck price
- XPG Core Reactor II VE80+ GoldCheck price
- be quiet! Dark Power 1380+ TitaniumCheck price
- be quiet! Dark Power 1480+ TitaniumCheck price
Specs
| Tier on my list | A · High-end builds |
|---|---|
| Wattages | 850W, 1050W, 1200W |
| Efficiency | 80 Plus Gold |
| Modular | Fully modular |
| Standard | ATX 3 |
| Size | ATX |
| Released | 2025 |
Montech Century II questions
Is the Montech Century II quiet?
It depends on the load. Tom's Hardware found the fan stays off until about 400W in normal conditions, so it's silent for everyday use. HWBusters found the fan profile aggressive, with more noise at moderate and high loads.
Does the Century II have a zero RPM fan mode?
Yes. HWBusters lists a selectable semi-passive mode, and Tom's Hardware a hybrid fan mode, so the fan stays off at lower loads.
Who makes the Montech Century II?
HWBusters names Shenzhen Xinweiye Technology as the OEM. It's less well known than the big names, but HWBusters found its platform capable.
What warranty does the Century II have?
Ten years, according to both reviews.
Which Montech Century II wattage should I get?
It comes in 850W, 1050W, 1200W. Match it to your graphics card using the output guide above, or the calculator for your exact parts.
Can I reuse cables from my old power supply with the Century II?
Use the cables that came in the box. Modular cables aren't standard between brands, or even between generations from one brand, and the wrong cable can damage your parts.